48
NOTES:
Your
client may or may not have the ability to provide security settings to
the WAP-5813n. If it does not, then you must set the WSC AP mode to
Configured. Consult the device documentation to check its capabilities.
In addition, using Windows Vista, you can add an external registrar using
the
StartAddER
button (
Appendix E
has detailed instructions).
II. NETWORK AUTHENTICATION
Step 3:
Select Open, WPA-PSK, WPA2-PSK, or Mixed WPA2/WPA-PSK network
authentication mode from the Manual Setup AP section of the Wireless
Security screen. The example below shows WPA2-PSK mode.
Step 4:
For the Pre-Shared Key (PSK) modes, enter a WPA Pre-Shared Key. You
will see the following dialog box if the Key is too short or too long.
Step 5:
Click the
Save/Apply
button at the bottom of the screen.
IIIa. PUSH-BUTTON CONFIGURATION
The WPS push-button configuration provides a semi-automated configuration
Step 3
