22
Enable LAN side firewall:
Enable by ticking the checkbox
;
.
DHCP Server:
To enable DHCP, select
Enable DHCP server
and enter Start
and End IP addresses and the Leased Time. This setting
configures the router to automatically assign IP, default
gateway and DNS server addresses to every PC on your LAN.
Static IP Lease List:
A maximum 32 entries can be configured.
To add an entry, enter MAC address and Static IP and then click
Save/Apply
.
To remove an entry, tick the corresponding checkbox
;
in the Remove column and
then click the
Remove Entries
button, as shown below.
DHCP Server Relay
: Enable with checkbox
;
and enter DHCP Server IP address.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address.
This option is hidden if NAT is enabled or
when the router is configured with only one Bridge PVC.
Vendor Class ID:
A maximum 32 entries can be configured. To remove an
entry, tick the corresponding checkbox
;
in the Remove
column and then click the
Remove Entries
button.
To add an entry, click
Add Entries
. The following screen will display.
