Comtrend Corporation WAP-5813n User Manual Download Page 32

Page: 32 / 76

them must be met. Click

Save/Apply

to save and activate the filter rule.

Consult the table below for detailed field descriptions.

Field

Description

Protocol Type

PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP

Destination MAC Address Defines the destination MAC address
Source MAC Address

Defines the source MAC address

Source/Destination
Interfaces

Applies the filter to selected WAN interfaces.

5.6

Parental Control

This selection provides WAN access control functionality.

5.6.1

Time Restriction

This feature restricts access from a LAN device to an outside network through the
device on selected days at certain times. Make sure to activate the Internet Time
server synchronization as described in

section 8.4

, so that the scheduled times

match your local time.

Summary of Contents for WAP-5813n













































































Search results

Summary of Contents for WAP-5813n

Reviews:

Related manuals for WAP-5813n

Brands by name

Popular brands

Comtrend Corporation WAP-5813n, User Manual

Search results

Summary of Contents for WAP-5813n

Reviews:

Related manuals for WAP-5813n

Brands by name

Popular brands