Comtech EF Data XPA-200, Installation And Operation Manual

Page: 39 / 96

XPA200-7984-I-OPT1, X-Band SSPA System Operation
XPA200-7984-I-OPT1, Rev.2 3-3
(See Figure 3-2)
--------- SELECT ---------
---
STORED
-
FAULTS
-
MENU
---------
SELECT
---------
---- CONFIGURATION - MENU --
---------
SELECT
---------
--
MONITOR
-
STATUS
-
MENU
---
---------
SELECT
---------
--
CURRENT
-
FAULTS
-
MENU
---
---------
SELECT
---------
- UTILITY - FUNCTIONS - MENU -
----
XPA200-7984-I
-----
SW VER 1.02 SNXXX
ENTER
(See Figure 3-3)
(See Figure 3-4)
(See Figure 3-5)
(See Figure 3-6)
LEGEND
------------------------
------------------------
KEY-PAD
RIGHT
LEFT
DOWN
ENTER
CLR
DISPLAY
UP
3.3 Operation
Local operation of the 200 watt, X-Band SSPA is controlled by
operator input commands initiated through the six button key-pad on
the front panel. The key-pad is the local operator's interface to
control, configure and monitor the status of the SSPA. Operator
inputs and commands entered into the key-pad are displayed by the
front panel twenty-four character, two line, LCD display. See Section
5.0 for Remote Control Operation.
There are five operating command functions: Configuration,
Monitor Status, Currents Faults, Stored Faults and Utility Functions.
A flow chart for selecting the commands, operating menus, and data
inputs is shown in Figures 3-1 through 3-6.
Figure 3-1. SSPA Operating Command Functions