Comtech EF Data XPA-200, Installation And Operation Manual

Page: 11 / 96

XPA200-7984-I-OPT1, X-Band SSPA Preface
XPA200-7984-I-OPT1, Rev.2 iii
will explode if the battery is incorrectly replaced.
Replace only with the same or equivalent type battery
recommended by the manufacturer. Dispose of used
batteries according to the Lithium battery
manufacturer’s instructions.
Returning a Product
The following information applies to a COMTECH equipment
product being returned for repair or replacement service:
NOTE: An item is considered “out-of-Warranty” if the warranty
period (as determined by the original purchase) has
expired; or the equipment has been damaged or otherwise
made unusable as a result of an accident or
unreasonable use, neglect, improper or unauthorized
service, repairs or modifications, or other causes not
arising out of defects in design, material, or
workmanship.
To return a COMTECH product for repair or replacement:
1. Request a Return Material Authorization (RMA)number
from the COMTECH Customer Service Representative, 1-(480)
333-4357, FAX 1-(480)333-2500.
2. Provide the Customer Service Representative with the
following information:
a. Model number.
b. Serial number.
c. Description of the problem.
d. Description of action taken to identify the
problem.
e. Name and telephone number of the company
contact.
3. The product being shipped should be packed in it's
original shipping container with proper packing material to
prevent possible shipping damage.