SLM-5650 Satellite Modem
Revision 2
Front Panel Operation
MN/SLM5650.IOM
4–21
Select: CONFIG: Remote: Remote: Ethernet
If Ethernet was selected:
IP Address/Range
Permits the user to select the IP address .
MAC
Displays the modem’s MAC address, this is programmed at the
factory and is not user changeable. If installed, the Gigabit Ethernet
interface’s MAC address will also be displayed.
Gateway
The IP Gateway address is the default address that the modem will
send all IP responses when the message originated from a source
outside the modems local attached network.
SNMP
Permits the user to select and control
Communities
or
Traps
.
GigaBit Interface
Address/Range
Permits the user to set the Gigabit Ethernet interface’s management
IP address and subnet mask (range).
IMPORTANT
For the address fields the value of the digit is changed using the
arrow keys. The user should then press [E]
4.3.2 Select:
Monitor
Alarms
Permits the user to select and view
Tx, Rx,
or
Unit
alarms.
Event-Log
Permits the user to select
View,
or
clear-all
stored
events.
Rx-Params
Permits the user to view
FC, RSL, BERT, Buffer, Eb/No,
or
BER
.
Statistics
Permits the user to select
View
,
Clear-All
or
Config
statistics.
GigaBit I/F
Gigabit Interface link statistics.
Permits the user to select
View
or
Clear-All.
Ethernet Config: IP Address/Range MAC
Gateway SNMP GigaBit I/F Addr
Monitor: Alarms Event-Log Rx-Params
Statistics GigaBit I/F Stats