Comtech EF Data SLM-5650 Installation And Operation Manual Download Page 76

Page: 76 / 188

SLM-5650 Satellite Modem

Revision 2

Front Panel Operation

MN/SLM5650.IOM

4–6

4.2 Opening

Screen

This screen is displayed when power switch is in the On position:

The bottom line displays the internal software version and the selected mode of operation. Press
[ENT] to go to the Main Menu screen.

IMPORTANT

Go to CONFIG: MODE and set the MODEM type, the FREQBAND, and
the INTERFACE type prior to preceding with the rest of the modem
configuration.

4.3 Main

Menu

The following selections are available:

Configure

Permits the user to fully configure the modem.

Monitor

Permits the user to monitor the alarm status of the unit, to view the
log of stored events, and to display the Receive Parameters screen
and clear all stored faults.

Test

Permits the user to configure the modem into one of several Test
modes.

Save/Load

Permits the user to save and retrieve up to 10 different modem
configurations.

Util

Permits the user to perform miscellaneous functions, such as
setting the Real-Time Clock, adjusting the display brightness, etc.

Comtech SLM-5650 Modem Status: GO
Firmware Version x.x.x Mode: TURBO

SELECT: Configure Monitor Test
Save/Load Util

Summary of Contents for SLM-5650





























































































































































































Search results

Summary of Contents for SLM-5650

Reviews:

Related manuals for SLM-5650

Brands by name

Popular brands

Comtech EF Data SLM-5650, Installation And Operation Manual

Search results

Summary of Contents for SLM-5650

Reviews:

Related manuals for SLM-5650

Brands by name

Popular brands