Comtech EF Data RC-1170 Installation And Operation Manual Download Page 36

Page: 36 / 94

RC-1170/1270 Redundancy Switch Controllers

Revision 0

Front Panel Operation

3–2

MN-RC-1170/1270

Table 3-1. Front Panel Features

Feature

Description

Function

LED Indicators

The LEDs indicate, in a summary fashion, the status of the modem.

Keypad

The keypad comprises six individual keyswitches. The keys have a positive ‘click’

action that provides tactile feedback. ENTER data via the keypad. Data, prompts,

and messages are displayed on the Vacuum Fluorescent Display (VFD).

Vacuum

Fluorescent

Display (VFD)

The VFD is an active display showing two lines of 40 characters each. It produces

a blue light with adjustable brightness. Nested menus display all available options

and prompt you to carry out a required action.

LEDs

Note: RC-1270 is shown above. RC-1270 is similar.

The LEDs reflect the unit status and offline/online switch position.

•

Green: Unit is ACTIVE and has no detected faults.

Online: Shown by a solid LED.

Offline: Shown by a flashing LED.

•

Yellow: Unit is in a muted condition or bias voltage is set to “Off”. This is only applicable
to some system configurations.

•

Red: Unit has a detected fault.

•

All LEDs blinking RED means no switch(es) detected

Summary of Contents for RC-1170































































































Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands

Comtech EF Data RC-1170, Installation And Operation Manual

Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands