Comtech EF Data RC-1170 Installation And Operation Manual Download Page 39

Page: 39 / 94

RC-1170/1270 Redundancy Switch Controllers

Revision 0

Front Panel Operation

3–5

MN-RC-1170/1270

3.2.1.1

Select: Config Menu

Use the

◄ ►

arrow keys to select a submenu. Press ENTER.

Table 3-3. Select: Config Menu Description

Item

Description

Remote

Use to make changes to the communications port.

Unit

Use to make changes to the unit.

Redundancy

Use to make changes to the Redundant configuration.

Mask

Use to define Mask / Alarm / Fault behavior to reported operating parameters.

Use the

◄ ►

arrow keys to select Remote, Unit, Redundancy, or Mask from this screen. Press

ENTER to continue.

3.2.1.1.1

Select: Config: Remote Control Menu

Table 3-4. Select: Config: Remote Menu Description

Item

Description

Local

Use for only front panel control.

Ethernet

Use for both front panel and ethernet port control.

Use the

◄ ►

arrow keys to select Local or Ethernet from this screen. Press ENTER to continue.

3.2.1.1.2

Select: Config: Unit Menu

Table 3-5. Select: Config: Unit Menu Description

Item

Description

Common

Use for global configuration controls.

Unit 1/2/3

Use to control the settings associated with the selected unit.

Use the

◄ ►

arrow keys to select Common or Unit 1/2/3 from this screen. Press ENTER to

continue.

Summary of Contents for RC-1170































































































Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands

Comtech EF Data RC-1170, Installation And Operation Manual

Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands