R-1170/1270 Redundancy Switch Controllers
Revision 0
Ethernet Interface Operation
5–18
MN-RC-1170/1270
5.5.2.3 Admin | SNMP
Figure 5-12. ‘Admin | SNMP’ Page
Name
Description
SNMPv1/SNMPv2c
SNMP Enable: Use the drop-down list to select Enabled or Disabled.
Enable Authentication Trap: Use the drop-down list to select Enabled or
Disabled.
Read Community String: Automatically populates as public.
Write Community String: Automatically populates as private.
Trap IP 1: The Administrator can assign up to two SNMP Trap IP Addresses.
Trap IP 2: The Administrator can assign up to two SNMP Trap IP Addresses.
Trap Version: Use the drop-down list to select the version.
Trap Community String: This can be any combination of characters and a length
of 0 to 20 characters. The factory default for the SNMP Trap Community String is
“comtech”.
SNMPv3
Auth Protocol: Select a value from the drop down menu.
Priv Protocol: Select a value from the drop down menu.
PrivPassword: Create a private password. The default is comtech.
SNMP Version
SNMP Version: Use the drop down list to select SNMPv1v2c. A reboot is required
for the selection to take affect.
Click
[Submit]
to save any changes or
[Reboot Now]
.
