Comtech EF Data RC-1170 Installation And Operation Manual Download Page 44

Page: 44 / 94

RC-1170/1270 Redundancy Switch Controllers

Revision 0

Front Panel Operation

3–10

MN-RC-1170/1270

3.2.1.4

Select: Utility Menu

Use the

◄ ►

arrow keys to select Date/Time, or Display Firmware from this screen. Press

ENTER to continue.

3.2.1.4.1

Select: Utility: Date/Time

Use this screen to set the real time clock used to time stamp events.

3.2.1.4.2

Select: Utility: Display

Use this screen to set the display brightness.

3.2.1.4.3

Select: Utility: Firmware (Images)

Use the

◄ ►

arrow keys to select Info or Select from this screen. Press ENTER to continue.

Select: Utility: Firmware: Firmware Info

This screen provides the released version of the two stored firmware images.

Use the

◄ ►

arrow keys to select Bootrom, Image #1, or Image #2 from this screen. Press

ENTER to continue.

Summary of Contents for RC-1170































































































Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands

Comtech EF Data RC-1170, Installation And Operation Manual

Search results

Summary of Contents for RC-1170

Reviews:

Related manuals for RC-1170

Brands by name

Popular brands