Comtech EF Data CDM-760, Installation And Operation Manual

Page: 268 / 441

Serial Interface Operation Revision 3
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
8–25
Parameter Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments for
Command or
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
(see Description of Arguments)
Command Query
Response to
Command
Response to
Query
GBEI Flow Control GFC= GFC? 1 byte, value of 0
or 1
Command or Query.
Enables or disables flow control in the form x, where:
0=Disable GBEI Flow Control
1=Enable GBEI Flow Control
NOTE: Applies to all ports.
GFC=
GFC*
GFC#
GFC=x
GBEI MAC
Learning
LRN= LRN? 1 byte, value of 0
or 1
Command or Query.
Enables or disables MAC address learning in the form x, where:
0=Disable MAC learning
1=Enable MAC learning
NOTE: Applies to all ports.
LRN=
LRN?
LRN=x
SNMP Read
Community
SRC= SRC? 1 to 20 bytes,
characters, no
spaces
Command or Query.
Sets or returns SNMP read community string.
NOTE: Empty string is not allowed
EXAMPLE: <0/SRC=public
SRC=
SRC!
SRC=x
SNMP
Write
Community
SWC= SWC? 1 to 20 bytes,
characters, no
spaces
Command or Query.
Sets or returns SNMP write community string.
NOTE: Empty string is not allowed.
EXAMPLE: <0/SWC=private
SWC=
SWC!
SWC=x
SNMP
Trap
Community
STC= STC? 1 to 20 bytes,
characters, no
spaces
Command or Query.
Sets or returns SNMP traps community string.
NOTE: Empty string is not allowed
EXAMPLE: <0/STC=Comtech
STC=
STC!
STC=x
SNMP Trap
Destination IP
Address 1
STA= STA? 15 bytes Command or Query.
Sets or returns the IP address of the first SNMP Trap destination IP Address 1 where traps will be sent, in the form
xxx.xxx.xxx.xxx.
EXAMPLE: <0/STA=010.006.030.001 (if not configured, returns 000.000.000.000)
STA=
STA!
STA=xxx.xxx.xx
x.xxx
SNMP Trap
Destination IP
Address 2
STB= STB? 15 bytes Command or Query.
Sets or returns the IP address of the SNMP Trap destination IP Address 2 where traps will be sent, in the form
xxx.xxx.xxx.xxx.
EXAMPLE: <0/STB=010.006.030.001 (if not configured, returns 000.000.000.000)
STB=
STB!
STB=xxx.xxx.xx
x.xxx
SNMP
System Contact
SSC= SSC? 0 to 255 bytes,
characters,
Command or Query.
Sets or returns SNMP System Contact string.
EXAMPLE: <0/SSC=Joe Net Admin (if not configured, returns empty string: <0/SSC=)
SSC=
SSC!
SSC=x
SNMP
Unit Name
SSN= SSN? 16 bytes,
characters,
Command or Query.
Sets or returns SNMP System Name string.
EXAMPLE: <0/SSN=Remote1 (if not configured, returns empty string: <0/SSC=)
SSN=
SSN!
SSN=x
SNMP
System
Location
SSL= SSL? 0 to 255 bytes Command or Query.
Sets or returns SNMP System Location string.
EXAMPLE: <1/SSL=Upstairs back right (if not configured, returns empty string: <0/SSL=)
SSL=
SSL!
SSL=x