Comtech EF Data CDM-760, Installation And Operation Manual

Page: 137 / 441

Front Panel Operation Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
6–48
On the bottom line
– Use the   arrow keys to select the alphanumeric character to
edit, and then use the  arrow keys to edit that character.
Note that only the first 20 characters on the bottom line are available. All printable ASCII
characters are available with the exception of the backslash ‘/’ (ASCII code 92) and tilde
‘~’ (ASCII code 126).
Press ENTER once you compose the SNMP Write Community string. All trailing spaces
are removed from the string upon entry.
(CONFIG: IP) SNMP

Traps
Traps: Community Version
IP-Addr#1 IP-Addr#2 (

)
Use the
 
arrow keys to select a parameter. Press ENTER .
(CONFIG: IP) SNMP

Traps

Community
SNMP Traps Community:
Comtech (20 chars) (


)
On the bottom line – Use the   arrow keys to select the alphanumeric character to
edit, and then use the

arrow keys to edit that character.
Note that only the first 20 characters on the bottom line are available. All printable ASCII
characters are available with the exception of the backslash ‘/’ (ASCII code 92) and tilde
‘~’ (ASCII code 126).
Press ENTER once you compose the SNMP Traps Community string. All trailing spaces
are removed from the string upon entry.
(CONFIG: IP) SNMP

Traps

Version
SNMP Traps Version:
SNMP-ver1 (ver1,ver2) (

)
Use the
 
arrow keys to select SNMP-ver1 or SNMP-ver2 . Press ENTER .
(CONFIG: IP) SNMP

Traps

IP-Addr#X
Trap IP addr #X:
000.000.000.000 (


)
On the top line – The letter ‘ X ’ in IP-Addr#X represents Trap IP Address # 1 or Trap IP
Address # 2 .