Comtech EF Data CDM-760, Installation And Operation Manual

Page: 214 / 441

Ethernet Interface Operation Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–47
7.4.4.3.10 Configuration: CID (Carrier ID)
Figure 7-26. Configuration | CID Page
Configure your settings as needed. Click [Submit] to save.
Meta-Carrier Info
•
The read-only MAC Address for t he M&C card on the CDM-760 is displayed here.
•
Set the modem’s physical location in Latitude in the form DDMM.mmC, where:
o
DD = degrees (00 through 90)
o
MM = whole minutes (00 through 60)
o
mm = fractional minutes (0 through 99 (tenths or hundredths))
o
C = compass cardinal point (N = North, S = South)
•
Set the modem’s physical location in
Longitude
in the form DDDMM.mmC, where:
o
DDD = degrees (000 through 180)
o
MM = whole minutes (00 through 60)
o
mm = fractional minutes (0 through 99 (tenths or hundredths))
o
C = compass cardinal point (E = East, W = West)
•
Enter a CID Telephone Number to provide a valid emergency contact number to call to
resolve operational issues – e.g., in case the modulator’s Tx output is causing interference
on the satellite. Providing this phone number allows a satellite operator to quickly call the
person(s) responsible for correcting any issues.
•
Create a
Custom Message
to provide additional information that may be useful in resolving
operational issues, e.g., to quickly resolve interference.
•
Use the
Carrier ID State
drop-down list to select operation as
On
or
Off
. This setting enables
the transmission of CID information by the modem. The default is On .
Click [Submit] to save your settings.