Comtech EF Data CDM-760, Installation And Operation Manual

Page: 197 / 441

Ethernet Interface Operation Revision 4
CDM-760 Advanced High-Speed Trunking Modem MN-CDM760
7–30
Add New Route
Use the available text boxes and drop-down lists in this section to create (add) a
new
route.
Note the following (from left to right):
Column Description
Index This is the read-only internal table index. It is automatically assigned.
(Route) Desc. This label helps to maintain the network. Enter a unique label consisting of up to 20
characters in this text box.
Dest.IP/Mask Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Interf. Use the drop-down list to select the Interface as toWAN or toLAN.
Next HOP IP Enter the desired Next Hop IP Address for toLAN routes. Note that no Next Hop entry is
needed for toWAN routes.
Click [Add Entry] to execute addition of the new route to the Route Table. Upon entry, the
Route Table index automatically increments to the next available number.
Route Table (Edit)
Use the available text boxes and drop-down lists in this section to make changes to an
existing
route. See “ Add New Route ” for detailed descriptions of each routing feature.
Click [Submit Changes] to save.
Delete Route
Enter Route Index to Delete , and then click [Delete Entry] to execute removal of that route
from the route table.
Delete All Routes (USE WITH CAUTION)
Use the drop-down list to select Yes or No for Delete All Entries? Click [Submit] to execute
removal of all entries from the route table.