Comtech EF Data CDD-880, Installation And Operation Manual

Page: 97 / 234

CDD-880 Multi Receiver Router MN-CDD880
Ethernet-based Remote Product Management Revision 2
6–27
Column Description
Index This is the read-only internal index number for the route. This number increments or
decrements automatically as you add or delete routes.
Description This label helps to maintain the network. The name you create must be 20 characters or less,
and it must be unique across all routes.
Dest. IP/Mask Enter a Destination IP Address/Mask in the form XXX.XXX.XXX.XXX/YY.
Intfc. Use the drop-down list to select the Interface as toWAN or toLAN .
Next Hop IP Enter the desired Next Hop IP Address for toLAN routes. Note that no Next Hop entry is
needed for toWAN routes.
Click [Add Entry] when done.
Delete Route
Enter Route Index to Delete . Click [Delete Entry] to delete the specified route entry from the
route table. Upon deletion, the Route Table index number automatically decrements to the next
available number.
Route Table (Edit)
Use the text boxes and drop-down lists to edit all current Route Table entries, as described
previously for the Add New Route section. Click [Submit Changes] to save. The Route Table
entries will update accordingly.
Filter Table (Edit)
Appendix F. dMESH ( VMS DYNAMIC MESH ) SOLUTIONS
In Dynamic Mesh configurations, the VMS will control adding additional "filter" routes in order
to avoid duplicated packets.
These "filter" routes are added and deleted by the VMS on an as-needed basis when a Dynamic
Mesh connection is added and then deleted. From left to right:
Column Description
Index This is the read-only sequential internal index number for the entry.
Description This is the name of the entry, as auto-generated by the CDD-880 that is dropping the
packets.
Dest. Network IP/Mask This column identifies the IP Address and CIDR of the packet’s destination.
Filter Map This column Identifies the specific demodulator that is dropping the packets (e.g., 1-12)