Comtech EF Data CDD-880, Installation And Operation Manual

Page: 29 / 234

CDD-880 Multi Receiver Router MN-CDD880
Introduction Revision 2
1–7
1.3.3.2.2 Rear Panel Optional Features
As per Figure 1-5 , from left to right:
Optional Power Interface:
•
48 VDC Primary Input Power Supply with Screw-in Fuse Holders
Optional hardware operation:
• (1X) DB-9M EIA-232 REDUNDANCY connector.
Rear Panel Rack Support Brackets Kits are available from Comtech EF Data:
•
KT-0000168 4” Rear-Mounting Support Brackets Kit
•
KT-0000195 10” Rear-Mounting Support Brackets Kit
Sect. 2.2.1 Install the Optional Rear-Mounting Support Brackets Kit
1.3.4 On-site Firmware Updates
Chapter 4. UPDATING FIRMWARE
Field update of the operating system firmware is possible through file upload via satellite or the
Ethernet port.
1.3.5 On-site Operational Upgrades
Chapter 5. FAST ACTIVATION PROCEDURE
Field activation of software-based options is possible through Comtech EF Data’s FAST ( F ully
A ccessible S ystem T opology) Feature upgrade process.
1.3.6 Monitor and Control Interfaces
•
Chapter 6. ETHERNET-BASED REMOTE PRODUCT MANAGEMENT
•
Chapter 7. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
The unit is managed through multiple interfaces providing options for both in-band (over
satellite) and out-of-band monitor and control.