Comrex LiveShot Portable, Manual

Page: 50 / 98

48
use wIth crosslock
By default, CrossLock (and therefore media streams) will use any available network deemed to be worthy of
media transport (except for the internal access point on LiveShot Portable). There may be circumstances where
one network is desired for remote control only and is not intended to move media streams.
An example of this is troubleshooting wireless connections remotely. You might want to attach a LiveShot to
Ethernet so you can view statistics generated by the device, but use only the wireless network(s) for media.
Any network present on the LiveShot can be told not to participate in CrossLock connections through the advanced
menu item “ Use with CrossLock ”. Setting this to “ no ” sets this network to be used only for control functions.
broadcast conFIg
This setting allows the chosen network to respond to “pings” from the Comrex Device Manager “ Scan
Network ” function. Unless specifically required to be disabled on your network, this should be set to “ yes ”