82
PeRMISSIve Mode
There may be situations (e.g. LiveShot is on an isolated network, or one on which security is less of a
concern) where you want to disable all restrictions regarding who can establish CrossLock connections
to your LiveShot. Note that only Comrex products with valid certificates can make these connections,
but
Permissive Mode
opens LiveShot to all other LiveShots.
The Permissive mode setting is under the
Config Tab-> Advanced->CrossLock VPN->Permissive->On
.
Before changing this setting, make sure you understand the implications described in “
About CrossLock
Security
” above. Also note that this change affects only the local LiveShot. The respective LiveShot in
the link must also grant permission to this one--via Switchboard, Manual Switchboard Peer entry, or
Permissive mode.
FIguRe 45
Summary of Contents for LiveShot Portable
Page 6: ......
