35
status sectIon
The bottom section of the interface (fifth tab on the app) is reserved for the unit’s status information.
fIgure 14
As shown in
Figure 14
, a thumbnail of any video that is applied to the input of the LiveShot is available
in the lower left corner, along with the detected input resolution.
To the right of the thumbnail is a status bar giving some other critical LiveShot information.
1
Unit Name
- either the default (
LiveShot <mac_address>
) name assigned to the
unit, or the name set by the user in the admin settings
2
Switchboard Server Status
- shows registration state with the Comrex
Switchboard server. If this does not show “registered” it could indicate a network
issue.
3
CrossLock Status
- shows whether or not a CrossLock connection has been
established, what the CrossLock destination address of the mating unit is, and
whether encryption is applied to the CrossLock link.
The status bar, when active, can use a significant amount of data on the network, especially in updating
the video thumbnail. If bandwidth is a concern, you can click the status section off with the button in
the lower right corner. This will disable retrieval of the thumbnail, and expand the other menus to use
the full screen.
Summary of Contents for LiveShot Portable
Page 6: ......
