Comrex LiveShot Portable, Manual

Page: 47 / 98

45
If you need to set the APN value manually, this process is shown in Figure 23 .
FIgure 23
Select the device in the interface to open the configuration settings. Search for an entry marked “ SIM ”,
which contains all the carrier-specific values for that modem. Under “ APN ”, a menu will be offered to
select the region and country of use, then a list of available carriers. Selecting a carrier should add the
correct APN . Carrier APN s are subject to change, and the APN can be input manually by choosing the
actual APN setting field and changing that.
dual ModeM support
When more than one Network Device is enabled and active on LiveShot Portable (regardless of
whether it’s wired or wireless, Wi-Fi or 3G/4G), the system will attempt to connect its CrossLock
VPN link over both devices simultaneously. Any connections made between LiveShots will be “
load
balanced ” with active media flowing both ways on all connections. This allows for “ doubling ” of
bandwidth on networks with low data rates.
When using more than one wireless modem with LiveShot, it’s advisable to bend the USB goosenecks
as far apart as reasonable for operation. This is to avoid the common problem of one modem’s
transmitter affecting operation of the other modem’s receiver.