70
MAkINg CroSSloCk CoNNECtIoNS wIthout SwItChboArd
In the case of non-Switchboard based connections (e.g. closed networks or STLs), you will need to know the unit ID
(Primary Ethernet MAC address) of the unit to which you wish to connect. This is input to the “
Create New Remote
”
pop-up in the “
MAC Address
” field.
In addition, the codec receiving the connection must have a similar entry made, with the MAC Address
of the calling unit populated.
This is important. The receiving unit must have an outgoing connection programmed into its address book, containing
the Unit ID (MAC address) of the calling unit, even if that entry is never used for outgoing calls.
Once a MAC address is populated in the field, you will have the option of disabling or enabling
CrossLock
for this
connection.
