32
wI-FI
When the included Wi-Fi adapter is attached to one of the USB ports, a network entry of “
WLAN Adapter
” will appear.
Selecting it will show the status, current IP address, and network chosen (if any).
When you first attach the Wi-Fi adapter, you must enable it before using it or scanning with it. You can enable the Wi-Fi
adapter by selecting it in the list and selecting
Enable
or choose “
Enabled
” under the WLAN option and set it to “
Yes
”
NX allows you to “scan” for active Wi-Fi Access Points, much like a computer or smartphone. This is done via the
“
Locations
” option under the WLAN adapter. Pressing “
Scan
” will deliver a list of active Wi-Fi networks. You can choose a
network from the scan results, choose “
Add Location
”, then edit the location for WEP or WPA passwords.
3g/4g
Cellular-based wireless modems will appear as their model name. Under most circumstances, the default settings are
correct for these modems, and they are enabled by default. It is possible to modify the APN setting if the default is not
correct by choosing the SIM option under configuration and choosing “
APN
”. You can input the new APN value into the
field manually.
You can also choose among pre-programmed APNs based on the list of carriers programmed into NX. By setting the
“
Region
”, “
Country
” and “
Carrier
” option, the list will suggest the proper APN setting for your carrier.
potS
When the optional POTS modem is attached to NX, the POTS modem will appear in the network list. Other than enabled/
disabled (enabled by default), there are no user configurations for the POTS modem.
