118
To communicate with a Zephyr Xstream:
a
Initial Setup - This will define all Standard RTP connections to be Xstream Compatible.
•
ACCESS Rack - On the
System Settings Tab
, open the
Standard RTP Settings
option
and choose
RTP Compatibility Mode
. On the pull-down box, select
Zephyr Xstream
.
•
ACCESS NX - Choose
System Settings
on the display. Enable Advanced options and
under Alternate Modes select
Standard RTP Settings.
Select
RTP Compatibility
Mode
and choose
Zephyr Xstream
.
b
Incoming Connections
- Zephyr Xstream sends an AAC stream to the ACCESS on UDP
port 9150. These streams will be automatically decoded. By default, a return channel
of AAC 96kb/s mono is returned to the Xstream. The return channel may be altered to
any Xstream-compatible mode in the
Systems Setting
section. ACCESS that do not have
the AAC upgrade applied will not create a return channel.
c
Outgoing Connections
(ACCESS AAC Option required) - Build a profile using the
Profile Manager
on either the ACCESS Rack or Portable and select a Channel Mode of
Standard RTP
. Then choose an Xstream-compatible encoder for the outgoing call. The
Xstream will control what type of stream, if any, is returned to the ACCESS.
3
Standard RTP
- This mode is set to receive a basic, unformatted AAC stream within a standard
RTP/UDP structure. At present, this mode does not offer compatibility with other industry
devices.
