Compuprint 914N, User Manual

Page: 117 / 146

Bit OFF ON
4 Auto CR No CR on vertical movement CR on vertical movement
3 Auto L No LF with CR Auto LF with CR
2 Form Length 11 inch form length 12 inch form length
1 Slashed Zero Normal Zero Select Slashed Zero
0 Character Set Character Set 1 Character Set 2
{parm 2}
The {parm 2} parameter specifies which printer function is enable (on) or
disable (off). These are the value definitions:
Bit OFF ON
7 Discard byte Process this byte Ignore this byte
6 S w i t ch f ro m U SA to
Multilingual font Initialize download
font area to USA font Initialize download
fo nt a rea to
Multilingual font
5 Reserved
4 Reserved
3 Reserved
2 Reserved
1 Line Length 13.6 inch print line 8 inch print line
0 Reserved
ESC >
Set the 8th bit of the byte to 1 (only EPSON mode).
1B 3E
27 62
This command sets Most Significant Bit of each data as 1.
ESC =
Set the 8th bit of the byte to 0 (only EPSON mode).
1B 3B
27 61
This command sets Most Significant Bit of each data as 0.
ESC #
Cancel Most Significant Bit control (only EPSON
mode).
1B 23
27 35
C
o
mm
an
ds
Appendix A
A78401740-001
A.33