Compuprint 914N, User Manual

Page: 107 / 146

m Mode dpi
0 Normal density 60
1 Dual density 120
2 Dual speed, dual density 120 (virtual)
3 Quadruple density 240 (virtual)
4 CRT Graphics I 80
6 CRT Graphics II 90
The following table shows you the 24 needles dot graphics modes available on
your printer (EPSON LQ and IBM Proprinter XL24 AGM modes):
m Mode dpi
32 Single density 60
33 Double density 120
38 CRT Graphics III 90
39 Triple density 180
40 Hex density 360 (virtual)
ESC [ g {l} {h} {m}{n1}...{nk}
Selects 8 or 24 needle dot graphics mode (only IBM
mode).
1B 5B 67 {l} {h} {m} {n1}...{nk}
27 91 103 {l} {h} {m} {n1}...{nk}
This command selects dot graphics in 8 or 24 needle configuration. {h}*256+{l}
represents the {number of data + l}. The {m} parameter represents the dot graphics
modes as shown in the following table:
m Density Needle Function
0 60 8 Same as ESC K (8 needles)
1 120 8 Same as ESC L (8 needles)
2 120 8 Same as ESC Y (8 needles)
3 240 8 Same as ESC Z (8 needles)
8 60 24 High Resolution for ESC K
9 120 24 High Resolution for ESC L
C
o
mm
an
ds
Appendix A
A78401740-001
A.23