Compuprint 914N, User Manual

Page: 42 / 146

27 BUZZER 01 VALID
28 IBM CHARACTER SET 01 SET 1
29 CODE PAGE 01 USA (#437)
30 IBM AGM MODE 02 INVALID
50 INTERFACE 01 PARALLEL
When the printing is complete, the printer enters the Setup mode.
Moving within the Printer Setup
Function Selection Mode
Press the
ON LINE
/
←
key to enter the Function Selection Mode (the displayed
function blinks). Press the
↑
or
↓
keys to scan the functions forwards or backwards.
When you wish to confirm the displayed function, press the
LOAD-PARK/
→
key,
the displayed function will be selected (it stops blinking) and enter the Value
Selection Mode.
Value Selection Mode
Press the
LOAD-PARK
/
→
key to enter the Value Selection Mode (the displayed
function value blinks). Press the
↑
or
↓
keys to scan forwards or backwards the
values. When you wish to confirm the displayed value, press the
ON LINE
/
←
key,
the displayed value will be selected (it stops blinking) and enter the Function
Selection Mode
Leaving the Printer Setup
When you wish to leave the current Printer Setup procedure, press the
PITCH/EXIT MENU
key, the new function/value settings will be stored and you exit
the Setup mode.
The Setup procedure allows the selection of the following printer functions:
u
Default Set Selection
u
User Selection
u
User Change Selection
u
Emulation Types
u
Form and Line Length
u
Line Spacing
Chapter 3
3.10
A78401740-001