Compuprint 914N, User Manual

Page: 41 / 146

The Printer Setup
The Printer Setup procedure allows you to set most of the printer’s
functions.You can perform this Printer Setup procedure via the operator panel. The
keys scan and select the available functions and their values.
Entering Printer Setup
u
Press the
ON LINE/
←
key to switch the printer off line.
u
Press the
QUIET/ENTER MENU
key to enter the Setup mode.
u
The printer prints out the factory default user settings (User 1):
The factory default user settings are the following:
Nr. Function Default value
01 DEFAULT. SET 01 OFF
02 SELECT USER 01 USER 1
03 CHANGE USER 01 USER 1
04 EMULATION 01 IBM
05 FORM LENGTH 12 11 INCHES
06 LINE SPACING 01 1/6 INCHES
07 LINE LENGTH 03 80 CHARACTERS
08 CHARACTER PITCH 01 10 CPI
09 FONT STYLE 01 DRAFT
10 POWER ON 01 ON LINE
11 QUIET MODE 01 OFF
12 AFTER AUTOLOADING 02 OFF LINE
13 PRINT DIRECTION 02 BI-DIRECTION
14 BUFFER FULL 01 WITH LF
15 CR CODE 02 CR
16 LF CODE 02 LF
17 CANCEL CODE 01 VALID
18 PAPER EMPTY SENSOR 01 VALID
19 SKIP PERFORATION 03 INVALID
20 ZERO CHARACTER 01 NOT SLASHED
21 SELECTION OF RAM 01 PRINT BUFFER
22 ASF 01 NOT INSTALLED
23 RIBBON MODE 01 BLACK RIBBON
24 AUTO TEAR OFF 01 INVALID
25 TEAR OFF POSITION 01 TOF POSITION
26 PAPER INITIALIZATION 01 OFF
F
UNZI
O
NAM
E
NT
O
Chapter 3
A78401740-001
3.9