Paper Handling
A78408744-002
47
Top of Form Adjustment
The Top of Form Adjustment procedure allows you to adjust the position of the first
printable line and therefore it is advisable to perform it immediately after a paper
loading. Turn the printer on , if it is not, and proceed as follows:
Make sure that the printer is not printing. (
READY
indicator unlit). If the
fanfold paper has been loaded, park it by pressing the
PARK
key. If the cut
sheet has been inserted, eject it by pressing the
FF
key.
1.
Press the
PROGRAM
key. The following message will be displayed:
SELECT MACRO
2.
Press the
↓
key until the following message is displayed:
PRINT ADJUSTMENT
3.
Press the
→
to select the function. The following message will be displayed:
Bidi. Alignment
4.
Now go on pressing the
↓
key until the following message will be displayed.
Top of form
5.
Press the
→
key to select the function. The paper is unloaded and
reloaded at the TOF quote. The current value will be printed and the
display will show the following message:
0/90 inches
The paper is moved to the view position. While scrolling all the possible
values by pressing the
↑
and
↓
keys the paper will be moved.
6.
Pressing again the
→
key the displayed value is selected and printed,
after the paper has been taken to the correct position. Then the paper will
be taken to the view position.
Summary of Contents for 4051 plus
Page 1: ...4051 plus 4056 plus User Manual...
Page 2: ......
