Compuprint 4051 plus, User Manual

Page: 15 / 75

Setting Up Your Printer
A78408744-002
7
9. Move the paper thickness lever according to the paper type:
•
If a cut sheet is loaded move the
lever towards the back of the
printer.
•
If a multicopy chemical paper is
loaded, first move the lever
completely towards the back of
the printer, then 1 notch towards
the front of the printer for each
copy.
•
If a carbon multicopy paper is
loaded, first move the lever
completely towards the back of
the printer, then 2 notches
towards the front of the printer
for each copy.
Now, you can load the paper and print your first test document (see later in
this section). If the pattern does not satisfy your expectation, adjust the
paper thickness lever.
When printing on multipart paper follow the above instructions to avoid
damaging the print head.
Paper Chute Installation
To insert the paper chute correctly, make sure that you are in front of the printer
and that you hold the paper chute in the front position