Setting Up Your Printer
A78408744-002
9
3.
If you wish to position the paper chute down, lift it towards the back of
the printer and push it gently down until it stops. If you wish to place the
paper chute in the raised position, lift it and hook it firmly.
Host Computer Connection
This printer can be connected to your host computer via two available
interfaces. The interface connectors are located on the rear of the printer.
•
A bidirectional IEEE1284 parallel interface
•
A RS-232C/422A serial interface
Make sure that both printer and host computer are switched off
Parallel Connection
Insert the parallel interface cable into the parallel connector and fasten it by
means of the clips.
Summary of Contents for 4051 plus
Page 1: ...4051 plus 4056 plus User Manual...
Page 2: ......
