Comprag 11100061, Manual

Page: 8 / 88

+7 (800) 777-83-75(звонок бесплатный)
www.v-p-k.ru A3008
12. Naked flames must not be used as a light source for inspecting and checking equipment.
13. Never use caustic solvents, which may damage materials of the pneumatic system.
14. After performing installation or other work, ensure that no instruments, rags or spare
parts have been left inside the equipment.
15. Pay particular attention to the safety-relief valves. Thoroughly inspect them and remove
any dust and dirt. They must not be allowed to suffer any loss in function under any circum-
stances. Remember that your safety depends on their functionality!
16.
Before beginning work in normal mode after maintenance or repair work, check that the
working pressure, temperature and other characteristics are correctly set. Ensure that all
control devices are installed and functioning properly.
17. When replacing filters, separators etc., wipe away dust, dirt and oil residue from the
area where they are installed with a dry cloth.
18.
Protect the motor, air filter, electrical components and control components etc. from
coming into contact with condensate. For instance, blow down with dry air.
19.
Use protective gloves during installation and repair work in order to avoid burns and
injury (for instance, during oil change).
2.
Technical data and functional description
Entitlement to free handling of faults arising during the guarantee pe-
riod is forfeited when:
- No warranty service coupon for the compressor or it is filled out
incorrectly
- No records for the compressor’s scheduled maintenance are entered
in the compressor’s service book
- Unoriginal parts and lubricants are used
2.1 Technical data
Article Model
Drive power,
compressor
(kW)
Max. operat-
ing pressure
(bar)
Output
(m3/min)
Rated
voltage,
compressor
(phase/V/Hz)
Noise
(dB)
Screw
connection
Oil
capacity,
liter
11100061 A3008
30
8 4,7
3/380/50
70
1-1/4
15
11100062 A3010 10 4,0
11100063 A3013 13 3,5
11100071 A3708
37
8 5,9
72
11100072 A3710 10 5,1
11100073 A3713 13 4,4
11100081 A4508
45
8 7,0
73
1-1/2
20
11100082 A4510 10 6,2
11100083 A4513 13 5,3
11100091 A5508
55
8 8,7
11100092 A5510 10 7,7
11100093 A5513 13 6,5
8