26
Compool Cp3400
A solid OFF indicates the equipment is off.
A blinking ON indicates the cleaner is in a safety delay mode. The cleaner will turn on in
5 minutes.
A blinking OFF indicates the heater is in a cool down mode. The pool will turn off after
10 minutes.
Equipment Status Lamps
Three Equipment Status lights are located on the top of the Control Panel.
Heater Light on indicates the heater is on.
Solar
Light on indicates the solar is on.
Service Blinking light indicates the system is in Service Mode.
Heater Protection
When the pool or spa is turned off, the system may keep the filter pump on for an additional 10
minutes to allow the heater to cool down. During this cool down cycle, and icon on the display
will indicate DELAY. Some heaters do not require a cool down period, so this function may
have been disabled. See Configuration Switches for details.
Cleaner Protection
Systems with an automatic pool cleaner (booster pump type) will have been set up to control it
with equipment key 1. The cleaner will operate in the following way.
Cleaner turns on pool.
Cleaner turns on after 5 minute delay.
Cleaner is disabled while spa is on.
Cleaner is disabled for 5 minutes when the solar turns on.
Canceling Heater and Cleaner Protection
For testing purposes only, it is possible to cancel the heater and cleaner protection by pressing
the CANCEL key, which is located behind the right-side door of the Control Panel.
