23
Compool Cp3400
Configuration Switches
After setting configuration switches, turn system power off for a few seconds.
FREEZE
Freeze settings are used to configure the following equipment.
FLTR
Activate filter pump during freezing conditions.
AUX1
Activate AUX1 during freezing conditions.
AUX2
Activate AUX2 during freezing conditions.
AUX3
Activate AUX3 during freezing conditions.
I/L - Interlock
Interlock settings are used to configure the following equipment.
SPA
Activate filter pump (single pump system)
CLNR
Activate cleaner interlocks. Cleaner must be installed on AUX1.
FDEL
Activate filter delay (heater cool down).
SYST - System
System settings are used to configure the following equipment.
SOLR
Activate solar system.
HTPMP
Activate heatpump as secondary heat source.
MANHT
Activate heater when spa is manually turned on.
WFAL
Activate an overflow from spa to pool. Uses AUX2 circuit.
FLRCL
Activate floor cleaner valve.
SPEC FUNCT - Special Functions
Special Functions settings are used to configure the following equipment.
DIM3
Activate dimmer for AUX3 circuit.
B/W
Activate backwash circuit.
HI SPD - High Speed
High Speed settings are used to configure the following equipment.
SPA
Activate high speed when spa is on.
HTR
Activate high speed when heater is on.
1
2
3
4
ON
1
2
3
4
5
6
7
ON
8
1
2
3
ON
1
2
3
4
ON
FLTR
AUX1
AUX2
AUX3
FREEZE
I/L
SYST
SPEC FUNCT
HI SPD
SPA
POOL
HEAT
SPA
CLNR
FDEL
SOLR
HTPMP
MANHT
WFAL
FLRCL
DIM3
B/W
SPA
HTR
AUX1
SOLR
PHONE CONTROLS
