Compliance West MegaPulse 360, Instruction Manual

Page: 16 / 22

10
Table 2 MegaPulse Code 360 Rear Panel Features
ITEM NO. NAME FUNCTION
1 Tester Information Contains Tester name and Serial Number and contact information.
2
Fuse replacement warning /
Rating of power supply
Specifies replacement fuse and required supply voltage.
3
Appliance Inlet / Fuse holder /
Power Switch
Use supplied cordset to connect the MegaPulse Code 360 tester to an appropriate source of supply. Fuse
holder provides access for Fuse replacement, and the Power Switch is used to turn the tester ON and OFF.
4 TestMinder Allow the communication between the tester and computer interface; a RS-232 to USB.
5 Interlock Switch (Optional)
Emergency Stop
Close: Enables the tester buttons for operation.
Open: Stops any process in the tester and disables the buttons. The
TRIGGER and CHARGE Indicators
will be blinking
6 Remote Control Interface Interface where the remote control is connected.
7 Fans The Fans on the rear panel maintain the air flow to cool down the tester.