Compliance West MegaPulse 360, Instruction Manual

Page: 10 / 22

4
Section 2
Getting Started
This manual contains complete operating, maintenance and calibration information for the Compliance West
USA MegaPulse Code 360 Impulse Tester.
Your tester is warranted for a period of one year upon shipment of the instrument to the original purchaser.
This section contains information for the unpacking, inspection, preparation for use and storage of your
Compliance West product.
Unpacking and Inspection
Packaging
Your Tester is shipped in a special protective container that should prevent damage to the instrument during
shipping. Check the shipping order against the contents of the container and report any damage or short
shipment to Compliance West USA. Please save the shipping carton and packing material for the carrier’s
inspection. Our customer support department will assist you in the repair or replacement of your instrument.
Please do not return your product without first notifying us and receiving an RMA (return material
authorization) number. To receive an RMA number, please contact our customer support department at (1-
800-748-6224).
Product Package for Code 360 Tester
Description Part Number
Code 360
MegaPulse Tester
User Manual
High Voltage Test Lead, Red 00-HVL7R (Qty 1)
High Voltage Test Lead, Black 00-HVL7B (Qty 1)
18 AWG AC Power Cord 70-101
TestMinder
(Optional)
User Manual
Software CD MegaPulse TestMinder P/PF
RS232 cable 60-134
USBD box 00-USBDBOX
USB cable 60-221
Returning the Instrument
When it’s necessary to return the instrument for servicing or calibration, repackage the instrument in its
original container, please include all accessories and test leads. Indicate the nature of the problem or type of
service needed. Also, please mark the container as “FRAGILE” to insure proper handling.
If you do not have the original packaging materials, please follow these guidelines:
•
Wrap the instrument in a bubble pack or similar foam including all the included cables.
•
Use a strong double-wall container that is made for shipping instrumentation.
•
Use a layer of shock absorbing material 70 to 100mm (3 to 4 inch) thick around all sides of the
instrument. Protect the control panel with cardboard.
•
Seal the container securely.
•
Mark the container as “FRAGILE” to insure proper handling.