Compliance West HT-10KVDC, Instruction Manual

Page: 7 / 29

2
Section 0
Quick Start
For a quick look at the abilities of the HT-10KVDC, we are providing this quick start page,
designed to get you up and running quickly. We recommend that you read the entire manual
before using the HT-10KVDC to conduct actual testing.
Initial Setup
1. Remove the HT-10KVDC from its shipping carton and set it up on a bench. Plug it in to a
correctly rated source of supply, using the supplied cordset. Turn it on using the switch on
the rear panel.
2. Switch the Test Duration switch on the rear panel to the DEFEAT position.
3. Push the RESET Button, then push and hold the TEST Button. The output voltage will stay
on while the TEST Button is pressed.
4. Set the voltage level using the Voltage knob on the front panel.
5. Let the TEST Button go; output voltage will drop to zero.
6. Plug the red lead into the Output Jack. Plug the black lead into the Return Jack.
7. Connect the Test Leads across the part to be tested. Push and hold the TEST Button. Watch
the front panel lights for test results.