PM1326
4-5. INSTALLING WELDING GUN
Gun Locking Tab In Place
Gun Locking Tab Out Of Place
1
1
2
2
3
4
6
Turn Off wire feeder and welding power
source.
Turn off wire feeder or welding power source
before handling or moving clamp.
1
Fix Knob
2
Gun Locking Tab
3
Power Pin groove
4
Gun Connection End
Installing gun with gun locking tab in
place system
Loosen power clamp knob to allow power pin
of gun to clear the gun locking tab.
Push power pin into power clamp as far as
possible to align the groove in the power pin
of the gun with the gun locking tab.
Secure gun by tightening power clamp knob.
Installing gun with gun locking tab out of
place system
When using a gun without the groove in the
power pin, loosen fix knob.
This prevents the locking tab from extending
into the pin gun connection.
Push pin into power clamp as far as
possible.
Secure gun by tightening fix knob.
5
Gun Control Cable
Insert plug into Gun Control receptacle, and
tighten threaded collar.
6
Pressure locking Clip
4
