PM1326
4-8. WELDING WIRE INSTALLATION - CONTINUATION
6
Open Pressure Assembly
Pull and Hold Wire, Cut
Off End.
Push Wire Thru Guides Into
Gun; Continue to Hold Wire
Hold Wire Tightly to Keep It From Unraveling
Close and Latch Pressure
Assembly, Let Wire Go Of Wire
Turn On Wire Feeder.
Turn On Welding Power Source
The Output Contactor Switch Must
Be in Next Position:
ON
OFF
POWER
WIRE
JOG
WOOD
Feed Wire, Check Drive Roll Pressure.
Tighten Knob Enough
to Prevent Slipping
Cut Off Wire.
Close And Latch Door.
Press Button Until Wire
Comes Out Gun.