PM1326
CAUTION
SECTION 2 - SAFETY INFORMATION
IMPORTANT:
Statements identify special instructions necessary for the most efficient operation
of this equipment.
WARNING
WARNING statements identify procedures or practices which must be followed
to avoid seriuos personal injury or loss of life.
CAUTION statements identify procedures or practices which must be followed to
avoid minor personal injury or damage to this equipment.
The following safety alert symbol and signal words are used throughout this manual to call attention to and
identify different levels of hazard and special instructions.
SECTION 3 - SPECIFICATION
3-2. Specifications
3-1. Rating Label Location
The serial number and rating information for this product is located on the front. Use rating label to determine
input power requirements and/or rated output.
This equipment will deliver rated output at an ambient air temperature up to 104F ( 40 °C).
3-3. Environmental Specifications
A. Temperature Specifications
Operating Temperature Range
Storage/Transportation Temperature Range
14 to 104°F (-10 to 40°C)
*Output is derated at temperatures above 104°F (40°C)
-4 to 131°F (-20 to 55°C)
1
Welding Power
Source Type
Wire Diameter
Range
75 to 900 ipm
(1.9 To 25.4
mpm)
0.23 To 1/8 in
(0.6 To 3.1 mm)
Max Pool
Weigth:
33 lb (15 kg)
100 Volts,
500 Amperes
100% Duty
Cycle
Length: 25 1/2in
650 (mm)
Width:11 in
(280 mm)
Heidth: 14 in
(356mm)
38.5 lb
(17.5kg)
Welding Circuit
Rating
Overall
Dimensions
Weigth
IP21S
IP
Rating
Type of
Input
Power
24 Volts AC
Single Phase
4 Amperes
50/60 Hz
Wire Feed
Speed Range
Constant Voltage
(CV) DC With
14-Pin And
Contactor
Control
