background image

Notice

The information in this publication is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR TECHNICAL OR
EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN, NOR FOR INCIDENTAL O
CONSEQUENTIAL DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, O
USE OF THIS MATERIAL. THIS INFORMATION IS PROVIDED “AS IS,” AND COMPAQ
COMPUTER CORPORATION DISCLAIMS ANY WARRANTIES, EXPRESS, IMPLIED OR
STATUTORY, AND EXPRESSLY DISCLAIMS THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, GOOD TITLE AND AGAINS
INFRINGEMENT

This publication contains information protected by copyright. No part of this publication may be
photocopied or reproduced in any form without prior written consent from Compaq Computer
Corporation.

© 1999 Compaq Computer Corporation.

All rights reserved. Printed in the U.S.A.

The software described in this guide is furnished under a license agreement or nondisclosure agreement.
The software may be used or copied only in accordance with the terms of the agreement.

Compaq, Deskpro, Fastart, Compaq Insight Manager, Systempro, Systempro/LT, ProLiant, ROMPaq,
QVision, SmartStart, NetFlex, QuickFind, PaqFax and ProSignia are registered with the United State
Patent and Trademark Office.

Netelligent, Systempro/XL, SoftPaq, QuickBlank and QuickLock are trademarks and/or service marks
of Compaq Computer Corporation.

NeoServer is a trademark of Compaq Information Technologies Group.

Microsoft, MS-DOS, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Pentium is a registered trademark and Xeon is a trademark of Intel Corporation.

Other product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.

Compaq Pro UPS 500 Operation and Reference Guide

First Edition (September 1999)

Part Number: 146293-001

i

Summary of Contents for Pro UPS 500




























































Reviews: