Hardware Options Installation
3-5
Compaq Confidential – Need to Know Required
Writer: Jennifer Hayward Project: Compaq ProLiant ML350 Generation 2 Server Setup and Installation Guide Comments:
Part Number: 236843-002 File Name: d-ch3 Hardware Options Installation.doc Last Saved On: 9/5/01 12:33 PM
4. To remove the bezel, lift the bezel upward, and pull it away from the
chassis.
Figure 3-3. Removing the bezel
To replace the bezel, reverse the above procedure.
NOTE:
When replacing the bezel, be sure that the bottom hinge points are properly
placed in the chassis before rotating the bezel back into its original position.
Removing the Access Panel in a Tower Server
To remove the access panel:
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
CAUTION:
To prevent damage to equipment or loss of data, make sure that the
server is powered down, all cables are disconnected from the back of the
server, and the power cord is disconnected from the grounded (earthed) AC
outlet before removing the access panel.
CAUTION:
Do not operate the server when the large access panel is removed.
This panel is an integral part of the cooling system and removing it while the
system is running may adversely affect data integrity.
