Compaq AA-RHBYA-TE 135267-001, User Manual

Page: 68 / 256

3-32 StorageWorks Fibre Channel Storage Switch User's Guide
MIB-II Support
There are eleven groups of objects specified in MIB-II. The Switch’s SNMP
agent supports 3 of these groups. The three groups supported include:
■
System group (object ID is {iso, org, dod, internet, mgmt, mib-2, 1})
■
Interfaces group (object ID is {iso, org, dod, internet, mgmt, mib-2, 2})
■
SNMP group (object ID is {iso, org, dod, internet, mgmt, mib-2, 11})
The following variables are modifiable via the SNMP set command, given an
appropriate community with read-write access:
The Switch is shipped with the default identifiers.
SysDescr
System description: the default value is set as “Fibre Channel
Switch”
sysObjectID
System object identifier vendor’s authoritative identification
(
1.3.6.1.4.1.1588.2.1.1.1
)
sysUpTime
The time since the agent was last initialized
sysContact
The identification and contact information for this system.
By default, this is set as “Field Support”.
sysLocation The node’s physical location. The default setting is “End
User Premise”.
The interface group supports three interface drivers: software loopback,
Ethernet, and Fibre Channel IP.
Fabric Element MIB Support
There are five object groups defined:
■
Configuration group
■ Operation group
■ Error group
■ Accounting group
■
Capability group.
The agent supports all groups.