Compaq AA-RHBYA-TE 135267-001, User Manual

Page: 199 / 256

Telnet Commands B-53
reboot
Figure B-31 shows the
reboot
command which reboots the Switch to the
stored configuration in flash memory and takes about 1 1/2 minutes. The
Switch maybe in any operational state (enabled or disabled) before rebooting.
admin> reboot
Figure B-31. reboot Command Example
syslogdIp
Figure B-32 show the
syslogdIp
command which sets or displays the
Switches system log daemon IP address.
The command syntax is
syslogdIp <“ip address”>.
admin> syslogdIp
syslog daemon’s address: 0.0.0.0
value = 35 = 0x23 = ’#’
Figure B-32. syslogdIp Command Example
switchDisable
Figure B-33 shows the
switchDisable
command used for diagnostic tests,
similar maintenance functions, or replacing a faulty Switch.
You can observe and verify this process by watching the front panel LEDs
change color from green to slow flashing amber as each port goes inactive.
admin> switchDisable
value = 0 = 0x0
Figure B-33. switchDisable Command Example