Compaq AA-RHBYA-TE 135267-001, User Manual

Page: 227 / 256

Telnet Commands B-81
Table B-18
interfaceShow Command Field Descriptions
Field Description
idbP
The port number.
nghbP
The neighbor (adjacent) Switch’s port
ifNo
The port number. It should be identical to the value specified in the
command line.
cost
The cost of sending a frame over the ISL connected to this port. The
value 1000 indicates a 1 Gbps link.
delay
The conventional delay incurred by a frame transmitted on this ISL.
It is required by the FSPF protocol, and is a fixed value.
upCount
The number of times this interface initialized (the transition number
from an offline to E_Port state).
iState
The current interface state. It must be UP in order for the ISL to
forward frames to the adjacent Switch.
state
The current neighbor state. Its value must be NB_ST_FULL for the
ISL to forward frames to the adjacent Switch. Other values may be
transitory, however if a value is retained for more than ten seconds,
contact Technical Support.
nghbCap
Neighbor capabilities has a value of 0.
nghbId
The neighbor (adjacent) Switch’s domain ID.
idbNo
The port number and it should be equal to No.
remPort
The port # on the remote Switch connected to this port.
nflags
Internal flags for the Neighbor Finite State Machine.
initCount
The number of times this Neighbor Finite State was initialized.
continued