Comnet CWGE9MS, Installation And Operation Manual, Page: 94 / 118

93
bandwidth out
[Value]
Set interface output
bandwidth. Rate Range
is from 100 kbps to
102400 kbps or to
256000 kbps for giga
ports, and zero means no
limit.
switch(config)# interface
fastEthernet 2
switch(config-if)# bandwidth out
100
show bandwidth I Show interfaces
bandwidth control
switch(config)# interface
fastEthernet 2
switch(config-if)# show bandwidth
state
[Enable | Disable]
I Use the state interface
configuration command
to specify the state mode
of operation for Ethernet
ports. Use the disable
form of this command to
disable the port.
switch(config)# interface
fastEthernet 2
switch(config-if)# state Disable
show interface
configuration
I show interface
configuration status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
configuration
show interface status I show interface actual
status
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface status
show interface
accounting
I show interface statistic
counter
switch(config)# interface
fastEthernet 2
switch(config-if)# show interface
accounting
no accounting I Clear interface
accounting information
switch(config)# interface
fastEthernet 2
switch(config-if)# no accounting