52
"
Egress:
Enter the port effective egress rate (The default value is “0”).
!
And then, select
to make the settings taken effect.
6.17 VLAN configuration
A Virtual LAN (VLAN) is a logical network grouping that limits the broadcast domain,
which would allow you to isolate network traffic, so only the members of the same VLAN
will receive traffic from the ones of the same VLAN. Basically, creating a VLAN from a
switch is logically equivalent of reconnecting a group of network devices to another Layer
2 switch. However, all the network devices are still plugged into the same switch
physically.
The switch supports
Port-based
and
802.1Q
(tagged-based) VLAN. The default
configuration of VLAN operation mode is “
Disable
”.
VLAN Configuration interface
6.17.1 Port-based VLAN
Packets can go among only members of the same VLAN group. Note all unselected
Summary of Contents for CWGE9MS
Page 20: ...19...
Page 37: ...36 Event Configuration interface...
Page 50: ...49 Port Trunk State Activity interface...
Page 60: ...59 Group Configuration interface Select button...
