28
6.6.1 System configuration
!
DHCP Server:
Enable or Disable the DHCP Server function. Enable—the switch
will be the DHCP server on your local network.
!
Low IP Address:
Type in an IP address. Low IP address is the beginning of the
dynamic IP range. For example, dynamic IP is in the range between 192.168.1.100
~ 192.168.1.200. In contrast, 192.168.1.100 is the Low IP address.
!
High IP Address:
Type in an IP address. High IP address is the end of the dynamic
IP range. For example, dynamic IP is in the range between 192.168.1.100 ~
192.168.1.200. In contrast, 192.168.1.200 is the High IP address.
!
Subnet Mask:
Type in the subnet mask of the IP configuration.
!
Gateway:
Type in the IP address of the gateway in your network.
!
DNS:
Type in the Domain Name Server IP Address in your network.
!
Lease Time (sec):
It is the time period that system will reset the dynamic IP
assignment to ensure the dynamic IP will not been occupied for a long time or the
server doesn’t know that the dynamic IP is idle.
!
And then, select
DHCP Server Configuration interface
Summary of Contents for CWGE9MS
Page 20: ...19...
Page 37: ...36 Event Configuration interface...
Page 50: ...49 Port Trunk State Activity interface...
Page 60: ...59 Group Configuration interface Select button...
