Comnet CWGE9MS, Installation And Operation Manual, Page: 113 / 118

112
smtp enable G Enable SMTP function switch(config)# smtp enable
smtp serverip
[IP address]
G Configure SMTP
server IP
switch(config)# smtp serverip
192.168.1.5
smtp sender
[sendername]
G Configure sender of
mail
switch(config)# smtp sender
dut1@xxx.com
smtp authentication G Enable SMTP
authentication
switch(config)# smtp
authentication
smtp account
[account]
G Configure
authentication account
switch(config)# smtp account
John
smtp password
[password]
G Configure
authentication
password
switch(config)# smtp password
1234
smtp rcptemail
[Index] [Email address]
G Configure Rcpt e-mail
Address
switch(config)# smtp rcptemail 1
Alert@test.com
show smtp P Show the information
of SMTP
switch# show smtp
no smtp G Disable SMTP function switch(config)# no smtp
event device-cold-start
[Systemlog|SMTP|Both]
G Set cold start event
type
switch(config)# event
device-cold-start both
event device-warm-start
[Systemlog|SMTP|Both]
G Set warm start event
type
switch(config)# event
device-warm-start both
event
authentication-failure
[Systemlog|SMTP|Both]
G Set Authentication
failure event type
switch(config)# event
authentication-failure both
event
ring-topology-change
[Systemlog|SMTP|Both]
G Set X-ring topology
changed event type
switch(config)# event
ring-topology-change both
event systemlog
[Link-UP|Link-Down|Bot
h]
I Set port event for
system log
switch(config)# interface
fastethernet 3
switch(config-if)# event systemlog
both