16
You can use the CWGE9MS managed Ethernet switch to connect PCs, workstations,
and servers to each other by connecting these devices directly to the switch. All the
devices in this network can communicate with each other. Connecting servers to the
backbone switch allow other users to access the server’s data.
The switch automatically learns node address, which are subsequently used to filter and
forward all traffic based on the destination address. You can use any of the RJ45 port of
the CWGE9MS managed Ethernet switch to connect with another Switch or Hub to
interconnect each of your small-switched workgroups to form a larger switched network.
4.3 X-Ring Application
This industrial switch supports the X-Ring protocol that can help the network system to
recovery from network connection failure within 300ms, making the network system more
reliable. The X-Ring algorithm is similar to spanning tree protocol (STP) algorithm but the
recovery time is faster than STP. The following figure is a sample X-Ring configuration.
Summary of Contents for CWGE9MS
Page 20: ...19...
Page 37: ...36 Event Configuration interface...
Page 50: ...49 Port Trunk State Activity interface...
Page 60: ...59 Group Configuration interface Select button...
